Let's start the lesson.
1. Open a new image of 1015 x 625 pixels – BLACK -Window - Duplicate (or shift+D) - Close the original and proceed on the copy -Promote Background Layer =Raster 1
![](Breathtaking_SajediE_bestanden/0.jpg)
![](Breathtaking_SajediE_bestanden/palette%2520couleurs.jpg)
- Material Properties-Set your foreground to "linear gradient" and select ‘’Corel_06_027’’ -Set your background color to black with these settings
![](Breathtaking_SajediE_bestanden/1.jpg)
2. Do not add a new layer– Flood Fill Tool: fill the layer with the gradient
3.Effects-Plugins – Medhi – Sorting Tiles
![](Breathtaking_SajediE_bestanden/2.jpg)
4.
Effets–Plugins Unlimited - Andrew's Filters 33-Through Many
Doorways..with these settings .
![](Breathtaking_SajediE_bestanden/3.jpg)
5. Effects-Edge Effects-Enhance More
6. Layers-Duplicate
7. Image
Free Rotate -Left 47,22
![](Breathtaking_SajediE_bestanden/4.jpg)
8. Layers-Duplicate
9. Image
Mirror
10. Layers-Merge-Merge-Down
11. Effects - 3D-Effects-Drop shadow with these settings :
![](Breathtaking_SajediE_bestanden/5.jpg)
12. Effects-Plugins – Simple - Top Bottom Wrap
13. Selections –load/save selection –load selection from disc and choose:
‘’Sajedi_1’’
14. Layers-New raster layer
15. Flood Fill Tool: fill the selection with the gradient
16. Effects-Plugins – Graphic Plus Cross Shadow with these settings
![](Breathtaking_SajediE_bestanden/6.jpg)
Selections-Deselect All
17.
Effects-Plugins –Toadies –What are you
28/0
18. Double click on this layer and set the Blendmode to "Difference"
19. Layers-Merge-Merge Down
20. Double click on this layer and set the Blendmode to "Screen "
21. Layers-Merge-Merge All
The result
![](Breathtaking_SajediE_bestanden/7.jpg)
Rename: Background-Promote background layer=Raster 1-Activate this layer
22. Adjust-Blur-Motion Blur with these settings
![](Breathtaking_SajediE_bestanden/8.jpg)
23. Layers-New raster layer
24. Color palette : Set your foreground color to white
-Activate Flood Fill Tool and fill the layer with the foreground color white
25. Layers- New Mask layer from Image and select Mask ‘’renee_masque_sajedi’’
![](Breathtaking_SajediE_bestanden/9.jpg)
26. Effects-Edge Effects-Enhance
- Layers-Merge-Merge-Group
27. Activate the tube ‘’deco_sajedi’’ You may minimize your tube for a moment, but do not close, we will need it again soon
- Activate the layer ‘’fourchette’’
- Edit/copy- Edit/ paste as new layer on your working image
28. With your Move Tool place it to the left side . Double click on this Layer and set the Blend Mode to "Luminance" (see finished image)
29. Layers-New raster layer
30.
Selections –load/save selection –load selection from disc and choose:
‘’Sajedi_2’’
-Color-Palette:
Change foreground material into a lineair gradient and select:
‘’Corel_06_027’’-with the same settings - Set your background color to black
31.- Flood Fill Tool: fill the selection with the gradient
Selections-Deselect All
32. Effects-Plugins – Neology- Blend Mosaic a 16
33. Effects-Plugins – Penta com – Color Dot using the default settings
90/2/255/255/255
34. Effects-Plugins – Flaming Pear flexify
2-click on the red arrow>select my file preset ‘’ Sajety_Flexify- 2 >can be used in any folder of your choice by clicking it. Open it will be ok in your filter.
Or manual settings as shown in the example below
![](Breathtaking_SajediE_bestanden/10.jpg)
35. Double click on this Layer and set the Blend Mode to "Overlay"
36. Color-Palette:
Change foreground material into a "fading white" nova gradient with these settings
![](Breathtaking_SajediE_bestanden/12.jpg)
37. Layers-New raster layer
38.
Selection-(S) Custom selection with these settings
![](Breathtaking_SajediE_bestanden/11.jpg)
39. Activate Flood Fill Tool and fill the selection with the gradient
Selections-Deselect All
40.
Effects-Plugins – Toadies – What are you
15/15
41.
Effects –Plugins - Unlimited - It@lian Editors Effect- Bordo con
luci
![](Breathtaking_SajediE_bestanden/13.jpg)
42. Layers-Duplicate
43. Image
Free Rotate 90° Left
44. Layers-Merge-Merge Down
- Layer Palette -Double click on this layer and set the Blendmode to" Hard Light "and set the layer opacity of this layer to 69%
45.
Selection-(S) Custom selection with these settings
![](Breathtaking_SajediE_bestanden/14.jpg)
Hit the Delete Key of your Keyboard![](Breathtaking_SajediE_bestanden/delete.gif)
Selections-Deselect All
46. Effects-Plugins – Penta Com – jeans 62/4
47. Effects-Edge Effects-Enhance More
48. Layers-Duplicate – Image Mirror
49. Color-Palette:
Change foreground material into a "fading white" linear gradient with these settings- Set the background color to black .
![](Breathtaking_SajediE_bestanden/15.jpg)
50. Layers-New raster layer
51.Selections –load/save selection –load selection from disc and choose: ‘’
Sajedi_3’’
52. Activate Flood Fill Tool and fill the selection with the background color black and fill the selection with the gradient on the same layer
Keep Selected
53.
Effects-3D Effects-Cutout with these settings
![](Breathtaking_SajediE_bestanden/16.jpg)
Selections-Deselect All
54. Effects-Plugins – Mura’s Meister –Perspective
tilling with these settings
![](Breathtaking_SajediE_bestanden/17.jpg)
55. Effects - 3D-Effects-Drop shadow with these settings
.![](Breathtaking_SajediE_bestanden/18.jpg)
56. Layer Palette - Double click on this Layer and set the Blend Mode to "Hard Light"
57. Activate the brush image ‘’ pinceau_safety ‘’
- File- Export- Custom Brush -Give it a name:
‘’pinceau_safety ’’
58. Activate the Brush Tool and choose the brush: ‘’pinceau_safety’’ with these settings
![](Breathtaking_SajediE_bestanden/19.jpg)
59. Layers-New raster layer
60. Color-Palette:Set the foreground color to white
Stamp your brush in the bottom left side by using your foreground color white (See finished image)
61. Layer Palette - Double click on this Layer and set the Blend Mode to "Hard Light"
62. Layers-New raster layer
63. Selections –load/save selection –load selection from disc and choose:‘’
Sajety_4 »
64. Activate Flood Fill Tool and fill the selection with the foreground color white
Selections-Deselect All
65. Activate the tube again ‘’deco_sajedy’’
- Activate layer ‘’effet_lumiere ‘’
- Edit/copy- Edit/ paste as new layer on your working image
- With your move tool place it as shown in the example below
![](Breathtaking_SajediE_bestanden/20.jpg)
66. Layer Palette - Double click on this Layer and set the Blend Mode to "Hard Light"
-. Activate the bottom of the Layer-Palette =Raster 1
67. Image
Canvas Size with these settings
![](Breathtaking_SajediE_bestanden/21.jpg)
68.
Activate the Magic Wand and select the transparent part
DO NOT A NEW LAYER
69. Activate Flood Fill Tool and fill the selection with the background color black
70. Effects-Texture Effects-Blinds with these settings – color #d60525
![](Breathtaking_SajediE_bestanden/22.jpg)
Selections-Deselect All
71. Activate the = tube ‘’ Renee_tube_sajedi1.pspimage’’
- Image
Resize with 70%
- Edit/copy- Edit/ paste as new layer on your working image ( Do not move it is the right place)
72. WITH arrow keys on the keyboard to move the layer down ![](Breathtaking_SajediE_bestanden/clavier.jpg)
against the bottom edge
- Activate the top of the layer-Palette
73. Activate the tube ‘’ Renee_tube_sajedi2.pspimage’’
- Image
Resize a 70%
- Edit/copy- Edit/ paste as new layer on your working image and move to the right side
74. Activate the tube ‘’deco_sajedi’’
- Activate the layer ‘’fourchette_2’’
- Edit/copy- Edit/ paste as new layer on your working image
75. Activate your
Pick Tool (K)
- place it as shown in the example below
![](Breathtaking_SajediE_bestanden/23.jpg)
76. Layers-Arrange-Move Down
77. Activate Soften Brush -using the default settings
and slightly move as shown below
![](Breathtaking_SajediE_bestanden/100.jpg)
Soften Brush =Softens the edges and reduces contrast
78. Activate the tube ‘’deco_sajedi’’
-Activate the layer ‘billes »
- Edit/copy- Edit/ paste as new layer on your working image and move to the upper right corner
-. Activate the bottom of the Layer-Palette = Raster 1
79. Layers-Duplicate
80. Effects
-Plugins –Unlimited - &<Bkg Designer sf10 I>- Center Mirror
60/128
81. Layer Palette - Double click on this Layer and set the Blend Mode to "Soft Light "
82. Effects-Plugins -- Alien Skin Snap Art – Oil Paint-
-tab Settings/User settings choose my preset: ‘’safedy_oil_paint »
83. Effects-Plugins – [AFS Import ] –sqborder2 with these settings
![](Breathtaking_SajediE_bestanden/24.jpg)
84. Effects-User Defined Filter– Emboss 3 using the default settings
-Activate the top of the layer-Palette
85. Layers-New raster layer
86.
Selections –load/save selection –load selection from disc and choose: ‘’
Sajedi_5’’
87. Activate Flood Fill Tool and fill the selection with the foreground color white ( click 2 times in the selection ( on the right side of her face)
![](Breathtaking_SajediE_bestanden/101.jpg)
Selections-Deselect All
88.Image - Add borders-Symmetric checked: 1 pixel black
89.Image - Add borders-Symmetric checked: 50 pixels white
90.Image - Add borders-Symmetric checked: 1 pixel black
91.Image - Add borders-Symmetric checked: 5 pixel white
92.Image - Add borders-Symmetric checked: 1 pixel black
93. Open the text-(2) Edit/copy-Edit paste as a new layer on your working image .Ore write your own text
94. Layers-Merge-Merge All
95. Image
Resize a 1015 pixels Width
Save as JPG
I hope you enjoyed this tutorial .
Renée
This lesson was written by Renée
25/05/2015
edited and update
2015
*
Any resemblance with an existing lesson is merely a coincidence *
* Don't forget to thank the people who work for us and with us. I named the tubeurs - Testers and the translators.
Thanks Renée.
*
*
|