PLUGINS

These filters were used in this lesson

FM Tile Tools Here

Toadies  Here

Simple  Here

 VM Extravaganza   Here

L & k’s   Here

Mura’s Meister   Here

Alien Skin EyeCandy 5 - Impact  Here

Flaming Pear Here

AAA Filters  Here

**

You can find my filters on my website

My Tubes

ATTENTION

If you intend to share these tubes or these lessons in a group, club or forum, please ask the owner for permission. The tube must not be sent without the lesson . Please do not activate any changes to the tube, as this tube was created for this lesson only. You can find my tubes on my website

Material here

This tutorial was made with PSP 2022 Ultimate

but can be done with other versions of Psp.

The colours may vary significantly depending on the Psp used.

Use the arrow to follow the tutorial

Let's start the lesson

MYRTA ( that was my cat)

- Preparation

-Material Properties: Set your Foreground color to color #081155=color 1 – Set your Background color to color #ed5001=color 2

- Properties Foreground- Prepare a Foreground/Background Radial Gradient configured like this

1. File: Open a Transparent Image in this size : 1100 x 600 Pixels

2.Flood Fill Tool –Fill the layer with the gradient

3. Layers– Duplicate

4. Image - Mirror - Mirror Horizontal (Image - Mirror in older versions of PSP)

5. Layers-Properties-Set the Blend Mode to " Screen "

6. Layers- Merge- Merge Down

7. Selections –load/save selection –load selection from disc and select my selection: ‘’MYRTA-1’’

8. Selections – Promote Selection to Layer

9. Effects - Plugins - Filters in Unlimited 2.0 - &<Bkg Kaleidoscope> - Kaleidoscope Flower : 224/19

10. Layers-Properties-Set the Blend Mode to " Multiply "

11. Layers- Merge- Merge Down

12. Selections –load/save selection –load selection from disc and select my selection: ‘’MYRTA-2’’

13. Selections – Promote Selection to Layer

14. Effects - Plugins - Filters in Unlimited 2.0 -Filter Factory Gallery D- Quantum Tile:   47 /119

15. Effects- Plugins - FM Tile Tools – Blend Emboss using the default settings

16.Layers – Duplicate

17. Image - Mirror - Mirror Horizontal (Image - Mirror in older versions of PSP)

18. Layers- Merge- Merge Down

19. Effects – Plugins – Toadies – What are you: 20 /20

20. Effects – Plugins- Simple-  Diamonds

21. Effects – Plugins – Toadies – What are you : 20 /20

22. Layers-Properties-Set the Blend Mode to " Hard Light "

-Activate the layer underneath = (Raster 1)

23. Effects - Plugins- Filters in Unlimited 2.0 - Toadies - *Sucking Toad*  Bevel II.2...:   88 / 88 /187

- Material Properties: Foreground colour remains at #081155=Color 1 – Set your Background color to color #ffffff=Color 5

- Properties Foreground- Prepare a Foreground/Background Linear Gradient configured like this

24. Activate Selection Tool -Custom Selection (S) -Rectangle use the settings below

- Activate the top of the layer-palette

25. Layers- New Raster Layer

26.Flood Fill Tool – Fill the selection with the gradient

27. Effects - Plugins or in Unlimited  - VM Extravaganza – Transmission:   178/ 61 /40

28. Effects – Plugins or in Unlimited  – Simple – 4 Way average

29. Effects – Edge Effects - Enhance

30. Layers-Properties-Set the Blend Mode to "Luminance "

31. Selections –load/save selection –load selection from disc and select my selection: ‘’MYRTA-3’’

32. Selection – Promote Selection to Layer

33. Effects – Plugins – L&k’s – Paris using the default settings

- Repeat: Effects – Plugins – L&k’s – Paris using the default settings

34. Effects – 3D-Effects – Drop Shadow with these settings: 3/3/75/20 Color black

35. Effects – Plugins – Toadies – What are you: 35/35

36. Effects –Reflection Effects -Feedback use the settings below

37. Layers – Duplicate

38. Image - Mirror - Mirror Horizontal (Image - Mirror in older versions of PSP)

39. Layers- Merge- Merge Down

40. Layers-Properties-Set the Blend Mode to " Multiply "

41. Layers- New Raster Layer

42. Activate Selection Tool -Custom Selection (S) -Rectangle use the settings below

43.Flood Fill Tool – Fill the selection with the gradient

44. Effects – Texture Effects – Blinds use the settings below /Color white

45. Effects –Reflection Effects -Feedback use the settings below

46. Effects – Plugins – Mura’s Meister – Perspective Tiling using the default settings

47. Layers-Properties-Set the Blend Mode to " Multiply "

48. Effects -Plugins - Alien Skin EyeCandy 5 - Impact  - Backlight –Tab- Settings- User Settings and select my file-‘’Renee-Myrta- Backlight’’(this is to lighten the bottom of the ground)

- Activate the bottom of the Layers Palette=Raster 1

49. Selections –load/save selection –load selection from disc and select my selection: ‘’MYRTA-4’’

50. Selections – Promote Selection to Layer

51. Adjust- Blur- Gaussian Blur- Radius 30%

52.Layers- Arrange- Bring to Top

53. Effects – 3D-Effects – Inner Bevel use the settings below - Color White

54. Effects – Plugins – Flaming Pear – Flexify 2 use the settings below

55. Image-Resize to 49 %- resize all layers not checked

56. Image - Mirror - Mirror vertical ( Image - Flip in older versions of PSP)

57. Objects – Align – Top

58. Open the Tube ‘’ Renee-TUBES-MYRTA 5’’

- Image - Resize to 49%

59. Edit - Copy- Activate your work -Edit - Paste as a new layer

60. Pick Tool: (K) on your keyboard -Enter these parameters on the toolbar

  417 /139

Press ( M ) to close the Pick Tool

61. Layers-Properties-Set the Blend Mode to " Hard Light " -Reduce the opacity of this layer to 63%

62. Open the Tube ’’texte’’ -Edit - Copy- Activate your work -Edit - Paste as a new layer

Place the text of your choice or take a look at the example of Renée

63. Layers- New Raster Layer

64. Selections –load/save selection –load selection from disc and select my selection: ‘’MYRTA-5’’

65. Properties Foreground-Set your Foreground color to color #ffffff=5

Flood Fill Tool – Fill the selection with #ffffff=5

66. Selections- Modify – Contract- 2 Pixels

67. Effects – 3D-Effects – Cutout use the settings below – Color #081155= 1

68. Selections – Modify – Contract - 8 Pixels

69. Effects – Plugins – AAA Frame – Foto Frame use the settings below

70. Open the Tube ‘’ Renee-TUBES-MYRTA 2’’ (or another one of your choice)

- Image - Resize - 40%

-Edit - Copy- Activate your work -Edit - Paste as a new layer - Placing in the frame(see finished image)

71. Layers- Arrange- Move Down

72. Effects – 3D-Effects – Dropshadow with these settings: 7 /18/ 65/45 Color white

73. Image - Add borders-Symmetric checked: 1 Pixel -Color #081155= 1

-Image - Add borders-Symmetric checked: 3 Pixels -Color #ffffff=5

-Image - Add borders-Symmetric checked: 1 Pixel -Color #081155= 1

-Image - Add borders-Symmetric checked:  30 Pixels -Color #ffffff=5

74. Selections – Select All

75. Image - Add borders-Symmetric checked: 2 Pixels -Color #ed6001=2

-Image - Add borders-Symmetric checked: 50 Pixels -Color #ffffff=5

76. Effects – Plugins AAA Frame - Texture Frame use the settings below

77. Selections - Invert

78. Repeat- Effects – Plugins AAA Frame Texture Frame /using the same settings

79. Open a tube of your own choice

- Renée has chosen this tube ‘’Renee-TUBES-MYRTA1’’

- Image - Resize- 78 %

- Edit - Copy- Activate your work -Edit - Paste as a new layer

- Layers-Properties -Lower the opacity to 83%

80. Open the Tube " titre "/Title Myrta- Edit - Copy- Activate your work -Edit - Paste as a new layer

-Place the Title of your choice or take a look at the example of Renée

-Paste the author's watermark on your work and your own watermark

81. Layers- Merge- Merge All ( flatten)

82. Image - Resize- 85%- Resize all Layers checked.

Save as JPG

I hope you enjoyed this lesson

Renée

This lesson was written by Renée 04/05/2023

Edited and Update

in  2023

*

*

Any resemblance with an existing lesson is a coincidence

* Do not forget to thank the people who work with us and for us -I have appointed the tubeurs and translators

Thanks *

ReneeGraphisme_All rights reserved

Tutorials under Copyright

To see your achievements here